http://WWW.RIDDHIPHARMA.CO.IN
RIDDHIPHARMAMACHINERYLTD 581dd6259ec66f0560a673b7 False 1762 167
OK
background image not found
Found results for
'electric motor'
S S Dust Collector with Trolley - Turbo Model - Paam Type INR   95000 INR  95000
-0%

S S Dust Collector with Trolley - Turbo Model - Paam Type

Model : RIDDHI (Turbo Model) Motor : 2 HP, 2800 RPM, 3 Phase, 50 Hz Capacity : 300 M³/Hr / 177 Cfm Max Pressure : 200 M Bar/ 2.80 PSI Max Vacuum : 165 M Bar Max Impeller : Made out of Aluminium Die Casting Fan Assembly : Made out of Aluminium Casting Body : Made out of S S 304 Filter : As per your requirement such as from 3 micron to 10 micron Shaker : Manual Dust Capacity : 45 Liters Net Weight : 75.000 Kgs.

INR 95000 INR 95000

Availability:True

Pay mode:COD only

view details
S S Dust Collector with Trolley - Turbo Model INR   95000 INR  95000
-0%

S S Dust Collector with Trolley - Turbo Model

Model : RIDDHI (Turbo Model) Motor : 2 HP, 2800 RPM, 3 Phase, 50 Hz Capacity : 300 M³/Hr / 177 Cfm Max Pressure : 200 M Bar/ 2.80 PSI Max Vacuum : 165 M Bar Max Impeller : Made out of Aluminium Die Casting Fan Assembly : Made out of Aluminium Casting Body : Made out of S S 304 Filter : As per your requirement such as from 3 micron to 10 micron Shaker : Manual Dust Capacity : 45 Liters Net Weight : 75.000 Kgs.

INR 95000 INR 95000

Availability:True

Pay mode:COD only

view details
Automatic Ampoule Filling and Sealing Machine INR   0 INR  0
-NaN%

Automatic Ampoule Filling and Sealing Machine

Automatic Ampoule Filling & Sealing Machine “Riddhi ” Introducing series of state of art technology Automatic Ampoule Filling & Sealing Machines for performance and GMP demanding customers in Pharmaceutical, Biotech, Veterinary, agriculture, chemical and cosmetics industry. The machine built on principal of slant travel of ampoules while filling and sealing to take care of vide variation of neck dimensions, thickness and ovality of available ampoules. The unit built on Stainless Steel Square pipe frame and totally encompassed with S.S. Coverings in pleasing matt finish. Further large opening available at bottom side for absolute cleaning. The pendant type electrical control panel is lifted from machine for ease of operation and safety. Process Operation The sterilized ampoule tray can be directly loaded into slant hopper of the machine. The synchronized star wheel delivers ampoules, one by one on moving eccentric, ampoule rack in four’s. During the stoppage of rack sequentially pre-gassing, filling, post gassing, pre-heating and final sealing / annealing is achieved. Change Parts The basic unit fitted with parts suitable for any one size of ampoules and one fill volume syringe, which include below: In the event of changeover of each size of ampoule, following change parts are required. 1. Star wheel 2. Stainless Steel Needle Salient Features:  Compact GMP model according to pharmaceuticals norms  Production Output 10 to 20 / minute in single head (Depend on ampoules sizes)  All contact parts made from AISI SS 316L & non-contact parts made from AISI SS 304 Suitable to fill 01ml to 20ml ampoules “No Ampoule No Filling” Systems eliminates to waste of costly liquid.  Ampoule neck centering during gas flushing and filling process.  Possibility of nitrogen flushing before and after liquid filling.  Full accessibility allows easy maintenance.  Machine equipped with Pre-Heating attachments.  Minimum change over time, little maintenance & easy cleaning.  In feed ampoules loading Stainless Steel Hopper  Duly filled and sealed ampoules sleep down through Stainless Steel Tray.  Imported Torches of fine gas setting and gas mixture for LPG& Oxygen gases for sealing.  Stainless Steel West tips collector for cutting the glass ampoules tips while sealing. Process Operation: Empty washed & sterilized ampoules fed into in-feed hopper from the left hand side of the machine to receiving rack. The moving rack which moves horizontally collect one ampoule from the receiving rack and transfer the ampoules to the machine in left to right in an inclined position through pre-gassing. Pre-gassing, Filling, Post Gassing, Pre-heating & sealing stations completes filling & sealing operations. Filled & sealed ampoules are putting downthrough stainless steel tray automatically. Technical Details of Automatic Single Head Ampoule Filling & Sealing Machine,Model RDHFS-30 (R&D Lab Model) Model RDHFS – 30 (GMP) R&D Lab Model No. Of Head for Filling & Sealing One Ampoule Handling Size 01ml to 20ml Production Out Put 10 to 20 Ampoules Per Minute depend on size Filling Accuracy +/- 1 % Required Gas For Sealing LPG + Oxygen (Combination) Nitrogen Flushing Pre & Post Nitrogen Flushing Available Power Required (Electrical) 0.5 H.P., 3 Phase, 380 Volts,50Hz, 4 wire systems (Power rating change as per customer’s domestic requirement) Contact Parts Stainless Steel 316 Non-Contact Parts Stainless Steel 304 Material Of Construction (MOC) SS 304 Square Pipe Frame Structure Finished Matt Finished Over All Dimensions 900mm (L) X 500mm (W) X 970mm (H) Net Weight 80 Kgs. Gross Weight 200 Kgs. (Including Wooden Packing)

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Multi Head Vial Ampoule Washing Machine INR   0 INR  0
-NaN%

Multi Head Vial Ampoule Washing Machine

Riddhi introduces a simple, compact, versatile and a reliable ampoule washing machine, Model: RDHAVW-340 with the latest GMP demand. The machine is enclosed in S.S Construction with a flexibility to wash 1ml to 25 ml ampoule & 2ml to 100ml vials with the help of suitable change parts. The standard unit is having mechanical motorized cam operated valve system for observing total six washing in one cycle. Alternatively, for demanding customer timer operated solenoid valve system or even a micro processor controlled timer sequences can be in-corporate to enhance and derive the best out of simple unit. PROCESS DESCRIPTION The dump loading procedure may be used, if ampoules are received in ready to dump boxes, which will have exactly into the same number of ampoule and the pitch, as loading tray. Alternatively, each ampoule have to be arranged into the tray. The loading tray & trays are placed directly in to the machine & the handle bar is lowered for ampoule for automatic centering of washing needles in to the ampoule mouths. The top cover is also lowered & switch is operated for automatic sequential washing both from inside & outside of each individual ampoule. The machine will automatically stop after one complete cycle & for removal of tray, reverse procedure is to be observed. Depending on dump loading or individual & operator's efficiency one can derive as high as 30 loading of tray / hour. SALIENT FEATURES •Positive & pressurized jets through washing needle for pressure cleaning at minimum usages of Washing Media. •Sound design concept of pressure tanks for reverses & continuous supply of washes medias •Both internal & external washing ensuring absolutely & continuous ampoule after sequential washing. •Acrylic top cover for clear view of washing events taking place in the machine. • On-line poly carbonates housing with P.P. replaceable filter cartridge of 10 microns for water & 5 microns for air for best possible washing. All contact parts of washing media & compressed are of S.S 316 or HDPE of Poly carbonate or P.P. • In the event of acrylic cover lifted during cycle operation, the machine will automatically stop and re- start from the point when cover is pushed down. TECHINICAL SPECIFICATION OUTPUT/CYCLE: each cycle time will be of approximately 58seconds. Depending on the operator's efficiency & method of ampoule loading, 30 cycles/hour can be achieved. Further, ampoule size and corresponding Multi Jet Needle Plate will decide the total output. Multi Jet Needles Ampoule Sizes In ML Vial Sizes in ML Output / Hour 100 Needles 1ml to 10ml 2ml vials 1500 to 3000 POWERCHARCTERISTICS 415,VOLTS,3PHASE,4WIRESYSTEM50CYCLES/SEC. POWERCONSUMTION 0.25H.P.FORMAINMACHINE Typical Washing Sequences & Consumption Per Cycle (Buyer to Provide) INTERNAL / EXTERNAL WASHING CONSUMPTION OF UTILITIES 1st Wash – D.M. Water 3 to 4 liters 2nd Wash – Air 3rd Wash – D.M. Water 3 to 4 liters 4th Wash – Air 5th Wash – W.F.I. 3 to 4 liters 6th Wash – Air 20CFMAir, Filteredto5Micronat5Bar, PressureforAirWashing andDM, DistilledWateratabout2kg/cm2GtobeprovidedbytheBuyer. TECHNICAL SPECIFICATION: Floor Space 990mm (L) X 1000mm (W) X 940mm (H) Net Weight 200 Kgs. Power Consumption 0.25 H.P., 3 Phase, 440 Volts, 50 Hz Case Dimension 1100mm (L) X 1100mm (W) X 1200mm (H) Gross Weight 350 Kgs.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
RIDDHI SEMI AUTO DIGITAL TABLET / CAPSULE COUNTING MACHINE MODEL RDTC-700 INR   0 INR  0
-NaN%

RIDDHI SEMI AUTO DIGITAL TABLET / CAPSULE COUNTING MACHINE MODEL RDTC-700

Machine Size : Length 1000 mm Width 650 mm Height 1100 mm. Body Structure : Stainless Steel 304. Power Supply : 230Volt (Single Phase) Air required : 3 Kg. Production Speed : 400 to 500 Tablets per Mint. or Capsule per Mint.200/300 (Depend on tablet/Capsule size Shape) HMI & P.L.C Base : Delta make Glass disc type : turn table Variable Speed : Counting sensor makes Banner (USA) Gear motor : Bonfiglioli Italy Air component with piston And Valve make SMC/ SMB Tablet Running Size :- 6mm To 15mm (OD) Tablet Thickness :- 4mm To 10mm Note :- Per Mint 400/500 Speed For Tablet Only 8mm And 10mm & Thickness. 5 mm Above Tablet accuracy 0.1 /0.2 % SPECIFICATIONS: Semi automatic machine (P.L.C. Based). Machine Structure stainless Steel 304 Variable speed available. Product wise filling quantity can be saved in PLC for reqular use Per hour counting output of approx. 30000 tablet / capsule Data for daily report is available in PLC Air pressure required 1kg Electric power 230V, Single phase Machine weight 150kg Approx.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Semi automatic Wet Glue Labelling Machine Manufacturers INR   120000 INR  120000
-0%

Semi automatic Wet Glue Labelling Machine Manufacturers

Semi Automatic Wet Glue Labeling Machine, GMP Model Technical Specifications: Model RD-LM-40 *Out put 5 to 40 Container / Minute. **Container Size Ø 27 mm to Ø 150 mm Height 35mm to 270 mm (Suitable for long/short neck, e.g. brut shape bottle). Gum For glass bottles – gum grade must be AP3505. Type of container Glass, Plastic, Aluminum, Pet etc. Label size Width: 25mm to 160 mm Length: 70 mm to 325 mm Motor 0.25 HP / 3 Ph. * Depending upon container / bottle size, label size and operator skill. ** Container must be round only. Additional Innovations:  Compact portable model, which can be used for regular production as well as in R & D Dept.  Can be used in liquid, tablet etc. dept.  Can be used in plastic, aluminum, pet containers etc.  Change over time – 10 minutes maximum.  Maintenance free  Immediate pay back saving in manpower.  Entire labeling area is covered with uniform gum application with minimum gum consumption.

INR 120000 INR 120000

Availability:True

Pay mode:COD only

view details
Semi Automatic Batch Printing Machine INR   0 INR  0
-NaN%

Semi Automatic Batch Printing Machine

Models :RDSAP-60-Printing Area :- 50mm. x 65mm.RDSAP-60EL-Printing Area :- 50mm. x 90mm.RDSAP-90-Printing Area:- 75mm. x 90mm. Printing Speed25,36 & 48 stroke per min. Drive Motor0.25 H.P., 1440 R.P.M., 1 Phase. Overall Dimensions in mm :650 x 475 x 275 Weight :@48 kg. Extra Facilities :Side & Back Stopper is provided for margin setting for large Labels/ Cartons/Pouches, Extension Platform support with side stopperis Provided.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Semi Automatic Sticker Labelling Machine INR   145000 INR  145000
-0%

Semi Automatic Sticker Labelling Machine

We manufacture semi automatic sticker or self adhesive labelling machine . Description: The Semi-Automatic Sticker Labeling Machine is one of the most user friendly systems for labeling Round type Bottle. The Machine incorporates PLC based Label Dispensing system with user friendly Sensing system for Label. The machine is suitable for Labeling on Round Bottle. TECHNICAL SPECIFICATIONS: Machine Type: Semi-Automatic Label Height: 20 mm to 250 mm Standard* Label Length: 20 mm Minimum,150mm maximum Label Roll Dia: 250 mm Maximum Label Type: Self Adhesive Sticker Roll Form Bottle Length: Minimum 25mm, Maximum 250mm Bottle Dia: Minimum 25mm, Maximum 100mm Core Dia: 75/76 mm Sticker Dispensing : Through AC Induction Gear Motor Gap Between two Labels: Appx. 3 mm Electrical: 220 VAC Single Phase Power Supply (50/60 Hz) Power: 1 Amp. Max. Control Panel: DELTA Make VFD SELEC make PLC For Bottle Counting Sensors: F&C Make Sticker Gap Sensor Overall dimension: 705 mm(L) X 450 mm(W) X 450 mm (H) Approx Fabrication: MS with Powder Coating and ENP Speed: Speed Variable through DELTA Make Drive Salient Feature  Easy to change label Roll.  User Friendly Label Placing Adjustments.  Self Protected against Voltage Fluctuations.  Built In A.C. Variable Frequency Drive System.

INR 145000 INR 145000

Availability:True

Pay mode:COD only

view details
1
false